Local Algester Plasterers
Plasterers Algester
Opening up brick homes and patching water leaks keeps us busy around Algester. We handle everything from hanging plasterboard to the final sand, leaving straight walls ready for your painter.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Algester
Plasterboard installation
New walls and ceilings for Algester renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering Work in Established Algester Homes
Many low-set brick homes in Algester have older battens and glue that let go over time, making ceilings sag. When you take out a wall or renovate a kitchen, joists often need packing out or levelling before new plasterboard goes up. Correct screw spacing and expansion joints help stop cracking from normal ground movement, letting new sheets tie neatly into old walls.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We patch altered doorways, repair damaged walls, and re-sheet entire rooms during renovations. We bed the tape properly, feather the joints out wide, and sand things smooth so your painter has an easy job.
Learn more →Commercial plastering
We build grid ceilings, bulkheads, and partition walls for local shops, clinics, and offices. Where acoustic or fire ratings are required, those ratings come from the specified system, and we install strictly to the manufacturer's system specs.
Learn more →Ceiling installation & replacement
Summer storms quickly find roof leaks, leaving soft spots and water stains on ceilings. We pull down bowed or mouldy plasterboard safely, check the timber framing underneath, and screw new ceiling board onto straight battens.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Algester plastering FAQs
Why is my ceiling beginning to sag along the screw lines?
Older glue dries out and lets go, letting sheets drop away from the timber. If the plasterboard is still sound, we can screw and back-block it back into place, or replace the section if it is too far gone.
How do you conceal beams after removing an internal wall?
We frame and line a plasterboard bulkhead around structural timber or steel beams. That hides the steel cleanly and gives you a neat spot for lighting if you want it.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Planning a renovation or need a ceiling fixed? Contact Queensland Interior Linings for clean plastering work across Algester.