Plastering Services in Bunya
Plasterers Bunya
Bunya homes often have big rooms and tall ceilings that need careful fixing and setting. We handle new builds, extensions, and repair work across the suburb, hanging plasterboard properly so you get flat walls, straight internal corners, and finishes ready for paint.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Bunya
Plasterboard installation
New walls and ceilings for Bunya renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Handling Wide Spans in Acreage Homes
Acreage properties across Bunya often feature broad, open-plan living areas and raked ceilings. Large timber roof trusses move as humidity changes throughout the year, putting stress on plasterboard joints if they are not isolated. We fit metal battens on clips and plan expansion control joints in the right spots. This gives the frame room to move without cracking your ceiling joints or causing sheets to sag over time.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We take on home renovations, patch jobs, and custom setups like media room bulkheads. Every plasterboard sheet is screwed off firmly and trowelled back clean, giving your painter flat surfaces and sharp internal corners to work with.
Learn more →Commercial plastering
We build grid ceilings, partition walls, and sound or fire-rated walls for local workspaces and sheds. Where acoustic or fire ratings are required, they depend on the specified system, and we install the framing, insulation, and sheets strictly to those system details.
Learn more →Ceiling installation & replacement
Sagging or water-damaged ceilings need proper attention before new board goes up. We check the joists and battens, replace broken or warped timber, and screw up fresh plasterboard with clean, flat joins. We also line raked ceilings and build square bulkheads that blend into the rest of the room.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Bunya plastering FAQs
How do you prevent cracking across wide ceiling spans?
On large ceiling areas, we use steel furring channels and set control joints where needed. This isolates the plasterboard from timber truss movement during wet and dry spells, stopping hairline cracks from showing up along the joins.
Can you fix ceiling damage caused by roof leaks?
Yes. Once the leak is fixed and timber has dried out, we cut away the damaged plasterboard, check the battens, and screw in new sheets. We then tape, set, and sand the joins so the patch blends into the surrounding ceiling.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Contact Queensland Interior Linings today for a straightforward quote on your Bunya plastering job.