Local Plastering Services in Darra
Plasterers Darra
Renovating older timber homes and fitting out commercial units keeps us busy around Darra. We hang plasterboard, flush joins, and patch damaged walls so surfaces are flat and ready for paint. You get tidy work and solid finishes that hold up over time.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Darra
Plasterboard installation
New walls and ceilings for Darra renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Lining Post-War Homes and Modern Infill
Darra has plenty of older weatherboard homes mixed with newer townhouses and light industrial sheds. In post-war houses, timber framing moves as seasons change, which can crack plaster joins or sag ceiling sheets. We back-block ceiling joins and check framing straightness before sheeting so repairs stay put. For industrial sheds and townhouses, we install impact board and fire-rated systems strictly to the manufacturer's specified design.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
From patching walls after trade work to sheeting full home extensions, we hang and stop plasterboard ready for the painter. We provide level 4 and level 5 finishes across living areas, keeping joins flat and corners square.
Learn more →Commercial plastering
We install suspended ceilings, grid systems, and partition walls for Darra sheds, offices, and shops. If your fitout calls for acoustic walls, we build and insulate them directly to the specified system design so they perform properly.
Learn more →Ceiling installation & replacement
Old glue fails and roof leaks cause plasterboard ceilings to buckle and sag. We pull down damaged sheets cleanly, screw new board to existing timber or steel battens, and tape and set the joins flat so you cannot tell where the repair happened.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Darra plastering FAQs
Can you match the finish on older Darra weatherboard home walls?
Yes. When repairing or extending older cottages, we blend new plasterboard into original surfaces. We feather the compound out wide and sand it flat so the join blends in once painted.
Do you install acoustic and fire-rated plasterboard for commercial units?
Yes. We install sound-rated and fire-rated wall systems for offices and industrial units. The acoustic and fire ratings come from the specified design system, and we hang, insulate, and seal the sheets to those exact system details.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Need a plasterer for your Darra renovation or repair? Contact Queensland Interior Linings today for a free quote.