Drewvale Plastering & Repairs

Plasterers Drewvale

Most plastering jobs in Drewvale come down to fixing settlement cracks, patching holes, or sheeting new rooms. Our local fixers and stoppers handle everything from small patch repairs to full house renovations, leaving flat, clean surfaces your painter can get straight into.

Get a Free Plastering Quote

Free, no-obligation quote

Your details are only used to respond to your enquiry.

  • 10+ years experience
  • Residential & commercial
  • Free written quotes

Plastering services in Drewvale

Plasterboard installation

New walls and ceilings for Drewvale renovations and extensions.

Ceiling repairs

Cracks, holes, sagging and water damage repaired or replaced.

Fixing & setting

Sheets fixed, taped, set and sanded to a paint-ready finish.

Bulkheads & ceilings

Bulkheads and suspended ceilings around services and ducting.

Practical Plastering for Drewvale Homes

A lot of homes around Drewvale are two-storey builds and modern brick-and-tile places. Movement between upper timber joists and ground slabs often causes hairline cracking through the ceiling joints, while fitting ducted air conditioning means boxing in neat bulkheads. We check the timber and battens before hanging sheets, using back-blocking and expansion joints where needed so the ceiling holds up through Brisbane's summer heat.

Genuine plastering photographs

Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.

Plasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior Linings

Residential plastering

We take on all types of home plasterboard jobs, including garage conversions, wall alterations, and room renovations. You get straight internal corners, clean cornice work, and drop sheets put down to keep the dust under control.

Learn more →

Commercial plastering

For shop fitouts and office spaces, we put up steel-stud framing, hang plasterboard, and drop in acoustic ceiling tiles. When fire-rated or acoustic walls are specified on the plans, we install the linings strictly to the manufacturer's designed system.

Learn more →

Ceiling installation & replacement

Sagging or water-damaged ceilings need sorting out before sheets drop. We cut back damaged plasterboard to the nearest joist, screw off fresh sheets, and feather the joints out flat so the repair blends in cleanly once painted.

Learn more →

Plasterboard fixing & setting

Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.

Learn more →

Suspended ceilings & bulkheads

We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.

Learn more →

Workmanship you can check

Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.

Simple quote & installation process

  1. 1

    Send your details

    Use the form with a few photos of the area.

  2. 2

    Inspection & quote

    We confirm the scope and give a clear written quote.

  3. 3

    Installation

    Sheeting, fixing, setting and sanding by our crew.

  4. 4

    Paint-ready finish

    A clean site and smooth surfaces ready for painting.

Drewvale plastering FAQs

How do you repair a water-stained ceiling from a roof leak?

Once the roof leak is fixed and the ceiling cavity is dry, we cut out the soft plasterboard. We screw off fresh plasterboard to the battens, bed paper tape into the joints, and apply three coats of base and topping compound, sanding it smooth.

Can you build bulkheads to conceal ducted air conditioning?

Yes. We frame up bulkheads using timber or light steel studs to box in the ductwork. We then sheet them in plasterboard and fit external metal beads so the edges stay straight, sharp, and ready for paint.

How do I get a quote?

Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.

What affects the price?

Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.

Nearby areas & services

Call Queensland Interior Linings today to talk through your plastering job or get a quote in Drewvale.