Ferny Grove Plastering Services
Plasterers Ferny Grove
Good plastering comes down to solid prep and clean trowel work. We handle plasterboard installation, repairs, and setting across Ferny Grove. From small patches to full house renovations, we work alongside local homeowners and builders to get interior walls and ceilings ready for paint.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Ferny Grove
Plasterboard installation
New walls and ceilings for Ferny Grove renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Renovating Older Homes in Ferny Grove
Many Ferny Grove homes are established timber-framed builds undergoing renovations or extensions. Older framing often shifts or bows over time, which shows up fast if you hang boards straight over it. We check stud and joist alignment before hanging plasterboard, packing out low spots so walls stay flat. Taking the time on the frame stops joins from cracking as the timber moves through the seasons.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We take care of everyday home plastering, from patching wall holes to sheeting new extensions and framing bulkheads. We tape and set every joint flush and keep our lines straight, leaving clean surfaces ready for your painter to roll.
Learn more →Commercial plastering
We install suspended ceilings, partition walls, and bulkheads for local shops, offices, and commercial fit-outs. Where acoustic or fire-rated walls are specified, we install directly to the manufacturer's designed system to achieve the required rating.
Learn more →Ceiling installation & replacement
Sagging plasterboard and water damage need quick attention before sheets pull loose. We inspect the battens, screw off loose boards, or cut out damaged sections and hang fresh plasterboard. Once taped and set flat, the repaired ceiling ties in cleanly with the rest of the room.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Ferny Grove plastering FAQs
How do you repair ceiling sheets that have started to sag?
We check the battens, scrape back failed glue, and screw the plasterboard firmly back into the framing. If the sheets are water-damaged or badly bowed, we replace those sections, tape the joins, and apply a three-coat finish.
Can you join new plasterboard into existing decorative cornices?
Yes. When patching or extending a room, we cut and butt the new plasterboard neatly up to the existing cornice. We hand-set the junction so the line stays clean and you keep the original room detail.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Call Queensland Interior Linings today for honest advice and a free plastering quote in Ferny Grove.