Local Plastering Services Across Inala
Plasterers Inala
Older post-war homes and brick houses across Inala often throw up uneven timber framing and movement cracks. We take care of sheeting, setting, and patching across the suburb, making sure your walls and ceilings end up straight, flat, and ready for paint.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Inala
Plasterboard installation
New walls and ceilings for Inala renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Practical Plastering Advice for Inala Homes
A lot of established homes in Inala have timber framing that has settled or twisted over time. Before fixing new plasterboard during a renovation, we check framing alignment with a straight edge. Packing out low spots or running metal battens gives a flat base so joints do not crack or show ridges later on. It is an important step when stripping out damaged old linings or refitting wet areas.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
From small patch jobs and extension work to full house relines, we handle all types of residential plastering. We tape and set joints cleanly and sand them flat, leaving your walls ready for paint without visible ridges.
Learn more →Commercial plastering
We build partition walls, flush bulkheads, and suspended ceilings for local shops and offices. Where acoustic or fire ratings are specified on a plan, we install strictly to the designed system so the build performs as intended.
Learn more →Ceiling installation & replacement
Sagging sheets and water-damaged ceilings need sorting before they fall. We inspect the framing, pull down ruined plasterboard, and screw and glue fresh sheets tight to the battens. We then bed the tape, set the joins, and sand them flat so the repair blends into the ceiling.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Inala plastering FAQs
Can you fix sagging ceilings in older Inala houses?
Yes. Ceilings often drop when old glue fails or joists settle. If the plasterboard is still in good condition, we can re-screw it to the timber. If the sheet is water-damaged or bowed beyond repair, we pull it down and put up new plasterboard.
How do you handle water-damaged plasterboard?
Once the leak is sorted and the space dries out, we cut back the soft plasterboard to the nearest sound timber stud or joist. We fix fresh plasterboard in place, tape and set the joints, and sand it back flush with the surrounding wall.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Ready to get your walls or ceilings sorted? Contact us today for an honest, upfront plastering quote in Inala.