Plastering Services in Kenmore
Plasterers Kenmore
Kenmore homes often need a mix of repair work and fresh plasterboard lining during renovations. We hang, tape, and set walls and ceilings properly, taking care of patching, framing repairs, and complete room fit-outs across the western suburbs.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Kenmore
Plasterboard installation
New walls and ceilings for Kenmore renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering Work in Established Kenmore Homes
A lot of Kenmore homes sit on sloping blocks with timber framing that moves slightly between wet and dry spells. Before fixing new plasterboard to older ceilings, we always check that the joists and battens are level. Running metal furring channels across the framing helps isolate the sheets from movement, stopping cracks from showing up along joints and doorways later on.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We take on home extensions, room updates, and small repairs. From clean square-set finishes and cornices to bulkheads for ducted air conditioning, we hang and stop up plasterboard so it is ready for paint.
Learn more →Commercial plastering
We build partition walls, suspended grid ceilings, and acoustic linings for local shops and offices. Where fire-rated or acoustic walls are specified, we install directly to the manufacturer's system so the wall performs as designed.
Learn more →Ceiling installation & replacement
Old ceiling glue lets go over time, and storm leaks can leave sheets sagging between the joists. We pull down damaged sections, check the battens, and screw new plasterboard up tight before setting joints flat and clean for the painter.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Kenmore plastering FAQs
Can you repair water-stained ceilings without replacing the whole room?
If the timber framing is solid and the plasterboard hasn't softened or sagged, we can cut out the damaged section, screw in new board, and feather the joints flush. If water has sat across the ceiling for days, replacing the whole area is usually the safer call.
How do you prevent settlement cracks reappearing in older split-level homes?
We use paper tape on joins because it holds up better to seasonal movement than fibreglass mesh. On timber that moves often, installing metal battens or expansion joints keeps the plasterboard from taking all the stress.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Get in touch with Queensland Interior Linings today for a practical quote on your Kenmore plastering job.