MacGregor Plastering & Plasterboard Services
Plasterers MacGregor
Renovating a brick family home or patching up rental walls in MacGregor takes solid plasterboard work. We handle everything from repairing damaged sheets to lining full rooms, leaving flat, clean surfaces ready for your painter.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in MacGregor
Plasterboard installation
New walls and ceilings for MacGregor renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering Work for Established MacGregor Homes
A lot of homes in MacGregor are solid, double-storey brick builds with older, segmented room layouts. When you take out non-loadbearing walls to open up the living space, tying the new plasterboard into the old sheets takes care. We check for uneven timber, pack out the battens, and feather the joins wide so you get a continuous, flat ceiling across your new open living area.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
From patching wall cracks to complete room linings, our residential work covers plasterboard hanging, setting joins, fitting cornice, and framing out clean bulkheads for your renovation.
Learn more →Commercial plastering
We handle commercial plasterboard fitouts for local offices and shops, including grid ceilings and stud partitions. For fire-rated or acoustic walls, the performance comes from the specified system design, and we fix and seal boards strictly to the manufacturer's system specs.
Learn more →Ceiling installation & replacement
Brisbane humidity and shifting foundations often cause ceiling cracks or sagging sheets. We re-screw loose boards, level down battens, and replace water-damaged ceilings using moisture-resistant plasterboard where needed so your ceiling stays flat and secure.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
MacGregor plastering FAQs
Can you flush-set patched ceilings after removing a wall?
Yes. Ceiling joists in older rooms rarely line up evenly. We pack out and level the battens, install back-blocks behind the sheet joins, and feather the plaster out wide so the patch blends in under natural light.
How do you repair water-damaged ceilings in two-storey homes?
We cut back the damaged plasterboard past the water marks, check the framing, and let the timber dry out. Then we screw and glue in new plasterboard sheets and apply a clean three-coat finish ready for paint.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Ready to sort out the plastering on your MacGregor job? Get in touch with us for a straightforward quote.