Nudgee Plastering & Ceiling Repairs
Plasterers Nudgee
Nudgee has a steady mix of older timber homes and fresh builds, and both need the right plastering approach. From hanging new plasterboard and setting joints to fixing old ceiling sag, we get the surfaces flat, straight, and ready for paint.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Nudgee
Plasterboard installation
New walls and ceilings for Nudgee renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering for Nudgee Renovations and New Builds
Homes around Nudgee range from post-war timber cottages to modern infill houses. In the older homes, natural frame movement often leads to cracked cornices and dropped sheets. We check the battens and straighten the framing before fixing any plasterboard. With new builds, Brisbane's humidity can mess with drying times, so we use the right compounds and let each coat cure properly to stop joints shrinking back or showing through.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We take care of full plasterboard fit-outs on new homes, extensions, and everyday patch jobs. Whether you want clean square-set ceilings, fresh cornices, or walls patched after electrical work, we leave your rooms flush and ready for the painter.
Learn more →Commercial plastering
We fit out commercial sheds, offices, and shopfronts around Nudgee. Our work covers suspended ceiling grids, bulkheads, and acoustic or fire-rated walls. For acoustic and fire walls, the rating comes from the specified system, and we hang and seal every sheet to match that design.
Learn more →Ceiling installation & replacement
Humidity, roof leaks, and failing glue cause ceilings to drop over time. We pull down damaged plaster, level up metal battens where needed, and screw off fresh plasterboard. Everything is taped, trowelled flat, and sanded smooth so the joins disappear once painted.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Nudgee plastering FAQs
Can you fix ceiling cracks common in older Nudgee timber homes?
Yes. Simply slapping base coat over a crack does not hold up. We check the joists first, pack out or replace tired battens if the frame has shifted, and screw off new plasterboard with a proper three-coat finish.
Do you install square set finishes for modern townhouses and extensions?
Yes. Square-set finishes need straight framing and solid bead work. We fit metal or paper-faced beads true to the line, then hand-finish multiple coats of compound to give you crisp, straight edges where wall meets ceiling.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Get in touch with Queensland Interior Linings today for a straight-up quote on your Nudgee plastering job.