Local Plastering Services

Plasterers Seven Hills

Working on homes around Seven Hills means dealing with everything from post-war timber cottages to newer multi-level builds. We hang, tape, and finish plasterboard so you get flat walls, straight internal angles, and smooth joins ready for your painter.

Get a Free Plastering Quote

Free, no-obligation quote

Your details are only used to respond to your enquiry.

  • 10+ years experience
  • Residential & commercial
  • Free written quotes

Plastering services in Seven Hills

Plasterboard installation

New walls and ceilings for Seven Hills renovations and extensions.

Ceiling repairs

Cracks, holes, sagging and water damage repaired or replaced.

Fixing & setting

Sheets fixed, taped, set and sanded to a paint-ready finish.

Bulkheads & ceilings

Bulkheads and suspended ceilings around services and ducting.

Plastering for Hillside Timber and Brick Homes

Seven Hills has plenty of older post-war timber homes alongside modern split-level houses. Natural ground movement on the slopes often leads to hairline cracks at cornice lines and butt joins. When renovating, we pack out uneven studs and check that battens are straight before screwing off sheets. Back-blocking ceiling joins and using base coats properly stops joins from peaking when the weather changes, keeping your walls and ceilings flat.

Genuine plastering photographs

Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.

Plasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior Linings

Residential plastering

We take on residential jobs ranging from patching a damaged hallway to sheeting full house extensions. That includes square-set ceilings, bulkheads, and custom robes. We sand our joins smooth and wipe down the edges so your walls are ready for paint.

Learn more →

Commercial plastering

We handle commercial fitouts, suspended grid ceilings, and partition walls for local shops and offices. If your project requires fire-rated or acoustic walls, the performance comes from the specified system, and we install the plasterboard and insulation strictly to that design.

Learn more →

Ceiling installation & replacement

Storm damage and old timber battens often cause ceilings to sag or crack. We cut out damaged sections, screw sagging sheets back into sound timber, or replace the entire ceiling if the paper has parted from the core. Joins are flushed wide so the repair blends into the surrounding room.

Learn more →

Plasterboard fixing & setting

Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.

Learn more →

Suspended ceilings & bulkheads

We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.

Learn more →

Workmanship you can check

Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.

Simple quote & installation process

  1. 1

    Send your details

    Use the form with a few photos of the area.

  2. 2

    Inspection & quote

    We confirm the scope and give a clear written quote.

  3. 3

    Installation

    Sheeting, fixing, setting and sanding by our crew.

  4. 4

    Paint-ready finish

    A clean site and smooth surfaces ready for painting.

Seven Hills plastering FAQs

How do you stop plaster cracking on hillside blocks?

Houses on sloping blocks flex as the soil moisture shifts. We back-block ceiling joins, install control joints across long runs, and secure sheets properly so the timber framing can move slightly without snapping the plaster joins.

Can you join new plasterboard into old horsehair plaster?

Yes. Fibrous plaster is often thicker than modern plasterboard. We pack out the framing behind the new sheet to match the height, then feather out setting compound across a wide join so the transition is not noticeable once painted.

How do I get a quote?

Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.

What affects the price?

Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.

Nearby areas & services

Contact Queensland Interior Linings for clean, dependable plastering work across Seven Hills.