Wellington Point Plastering Services
Plasterers Wellington Point
Bayside salt air and seasonal timber movement mean Wellington Point plasterwork has to be done properly from the framing out. We handle plasterboard fixing, joint setting, and patch repairs across the suburb, leaving clean, flat walls and ceilings ready for the painter.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Wellington Point
Plasterboard installation
New walls and ceilings for Wellington Point renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering for Bayside Conditions
Homes out near the water deal with plenty of humidity and seasonal movement. On older brick-and-tile houses and high-set timber builds, that movement often shows up as cracking along cornice lines and sheet joins. We use quality paper tape and trade basecoats across wide open-plan rooms so joints hold together when the weather shifts.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
From updating older family homes to sheeting new extensions, we cover all residential plastering. That includes hanging plasterboard, square-setting, running cornice, and patching damaged walls back to a smooth, flat surface.
Learn more →Commercial plastering
We fit suspended grid ceilings, fire-rated walls, and acoustic partitions for local shops and offices. Acoustic and fire ratings come from the architect's specified system, and we install strictly to those system designs.
Learn more →Ceiling installation & replacement
Deteriorating adhesive and old roof leaks often lead to sagging plasterboard ceilings in established homes. We strip out broken sheets, check and re-batten the joists where needed, and screw off new plasterboard with clean, flat joins.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Wellington Point plastering FAQs
How do you repair cracked joins caused by humidity?
We scrape back loose filler, re-screw the plasterboard into the framing timber, and bed paper tape into trade basecoat. Paper tape handles seasonal movement far better than stick-on fibreglass mesh.
Can you fix ceiling damage from roof leaks?
Yes. Once the roof leak is sorted, we pull down the water-damaged plasterboard, check the timber framing, and install new sheets flush with the existing ceiling.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Get in touch today for straightforward advice and a quote on your Wellington Point plastering project.