Plastering & Ceiling Repairs in Westlake
Plasterers Westlake
Working on homes around Westlake means dealing with everything from high raked ceilings to simple wall patches. We handle sheet fixing, jointing, and cornices for local renovations and repairs. You get flat joins and clean work without the runaround.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Westlake
Plasterboard installation
New walls and ceilings for Westlake renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Ceiling Repairs for Established Westlake Homes
A lot of homes in Westlake have multi-level layouts and high raked ceilings that move over time. When you combine older timber framing with Brisbane humidity, you often see popped screws, hairline cracks along joins, or sagging plasterboard. We check the battens, use glue and screws properly, and put expansion joints where they belong so the repair holds flat across seasonal shifts.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
Renovating a kitchen or opening up living areas takes solid prep. We hang plasterboard, flush up joints, set clean square edges, and build bulkheads. Everything is trowelled smooth and ready for your painter to take over without catching uneven joins.
Learn more →Commercial plastering
We build suspended grid ceilings, bulkheads, and acoustic wall systems for local shops and offices. If your fitout calls for specific acoustic or fire ratings, we install the plasterboard strictly to the specified system design. We work quickly to keep business downtime down.
Learn more →Ceiling installation & replacement
Storm leaks and ageing glue often cause ceiling sheets to drop. Before putting up new plasterboard, we check the battens and straighten framing if needed. From replacing a single water-stained section to re-sheeting a whole room, we screw and set the boards properly so your ceiling stays flat and solid overhead.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Westlake plastering FAQs
How do you repair a water-damaged ceiling?
First, make sure the leak is sorted. Then we cut out the soft, water-damaged plasterboard, check the timber framing for moisture, and fit new board. We finish with base coat, paper tape, and top coats, sanded ready for undercoat.
Can you fix cracked plaster joints on raked ceilings?
Yes. High and raked ceilings move as the roof expands in the heat. We re-screw loose plasterboard to the timber, re-tape the joins with paper tape, and bed it in with fresh compound so the crack doesn't just open straight back up.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Get in touch today to talk through your plastering or ceiling repair in Westlake.