Inner-North Brisbane Plasterers
Plasterers Windsor
Renovating an older timber home or fitting out a shop in Windsor takes careful prep work. We hang, tape, and set plasterboard properly so your painter gets a smooth, straight finish that lasts.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Windsor
Plasterboard installation
New walls and ceilings for Windsor renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering Windsor Homes and Renovations
Windsor has plenty of older timber homes alongside newer builds. Working on settled timber framing means walls are rarely dead plumb. We check the frames first, pack or batten out low spots with metal furring channel, and set joints so they handle movement without cracking. That keeps joins tidy where fresh plasterboard meets original timber mouldings.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We take on full home re-sheeting, extensions, and small repair jobs. From squaring up window reveals and setting clean shadow lines to patching cracked hallways, we leave walls and ceilings flat and ready for your painter.
Learn more →Commercial plastering
We build grid ceilings, bulkheads, and acoustic wall partitions for local shops and offices. Where acoustic or fire performance is needed, we install the boards, insulation, and sealants strictly to the specified system design.
Learn more →Ceiling installation & replacement
Old timber battens and roof leaks often lead to sagging plasterboard in older homes. We pull down water-damaged sheets safely, check the framing, and re-sheet with proper screw patterns and back-blocking so your new ceiling stays flat.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Windsor plastering FAQs
Can you match plasterboard flush against old timber VJ walls?
Yes. When joining plasterboard to existing vertical timber walls, we batten out the frame or use stopping beads. That gives you a clean junction between old timber and new board without odd ridges.
How do you repair a water-damaged ceiling safely?
We prop or cut out the wet plasterboard, check that the joists are dry, and screw off fresh board into solid timber. Then we apply multiple coats of base and topping compound, sanding it smooth to blend in.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Got a renovation, repair, or commercial job in Windsor? Get in touch with us for a straightforward quote.