Local Brisbane Southside Plasterers
Plasterers Annerley
Annerley homes throw up plenty of plastering challenges, from cracked ceilings in pre-war cottages to fresh partition walls in newer townhouses. We patch holes, hang board, and set joints flat so your painter can get straight to work.
- 10+ years experience
- Residential & commercial
- Free written quotes
Plastering services in Annerley
Plasterboard installation
New walls and ceilings for Annerley renovations and extensions.
Ceiling repairs
Cracks, holes, sagging and water damage repaired or replaced.
Fixing & setting
Sheets fixed, taped, set and sanded to a paint-ready finish.
Bulkheads & ceilings
Bulkheads and suspended ceilings around services and ducting.
Plastering Across Annerley's Old and New Homes
Annerley has a mix of timber cottages, post-war houses, and modern townhouses. Older frames often move and settle unevenly over time, so we pack or plane out battens before fixing plasterboard to avoid visible dips. On townhouses and split blocks, acoustic and fire ratings come down to the specified system, and we hang and set the boards strictly to those manufacturer specs. For bathrooms and laundries, we use the right moisture-resistant board.
Genuine plastering photographs
Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.
Residential plastering
We handle room renovations, patch jobs, and home extensions. We screw off sheets properly, tape every joint, and finish internal corners square, giving you flat walls that are ready for paint.
Learn more →Commercial plastering
We fit out offices, shops, and local clinics with suspended grid ceilings, bulkheads, and partition walls. If you need fire-rated or acoustic walls, we install the exact board and framing system specified on your plans to maintain the designed rating.
Learn more →Ceiling installation & replacement
Old timber battens and roof leaks cause ceilings to sag or stain. We cut out damaged sections, check the joists above, and resheet or patch the area. We feather out joints cleanly and tie new work into existing cornices without leaving obvious ridges.
Learn more →Plasterboard fixing & setting
Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.
Learn more →Suspended ceilings & bulkheads
We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.
Learn more →Workmanship you can check
Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.
Simple quote & installation process
- 1
Send your details
Use the form with a few photos of the area.
- 2
Inspection & quote
We confirm the scope and give a clear written quote.
- 3
Installation
Sheeting, fixing, setting and sanding by our crew.
- 4
Paint-ready finish
A clean site and smooth surfaces ready for painting.
Annerley plastering FAQs
Can you match new plasterboard with original fibrous plaster?
Yes. When renovating older homes, we blend modern plasterboard into intact fibrous plaster or lath walls. We pack out any difference in sheet thickness, feather the joints out wide, and match standard cornice profiles so old and new sections sit level.
How do you treat ceiling water stains before replastering?
First make sure the leak is fixed and the timber has dried out. If the board is soft or sagging, we cut it out and put up fresh plasterboard. If it is still solid, we scrape it back, patch it, and recommend an oil-based stain sealer before painting.
How do I get a quote?
Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.
What affects the price?
Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.
Get in touch with Queensland Interior Linings today for an honest quote on your Annerley plastering job.