Northside Plastering & Ceiling Repairs

Plasterers Taigum

Working on lowsets and townhouses across Taigum, we hang sheets, flush joints, and repair damaged ceilings. From full home renovations to shop fit-outs, we leave your walls flat, smooth, and ready for paint.

Get a Free Plastering Quote

Free, no-obligation quote

Your details are only used to respond to your enquiry.

  • 10+ years experience
  • Residential & commercial
  • Free written quotes

Plastering services in Taigum

Plasterboard installation

New walls and ceilings for Taigum renovations and extensions.

Ceiling repairs

Cracks, holes, sagging and water damage repaired or replaced.

Fixing & setting

Sheets fixed, taped, set and sanded to a paint-ready finish.

Bulkheads & ceilings

Bulkheads and suspended ceilings around services and ducting.

Plastering for Taigum Homes and Townhouses

Taigum has a mix of older brick homes and newer townhouse builds, and both throw up their own plastering issues. In older lowsets, brittle or sagging ceilings often need stripping back and re-sheeting with properly screwed plasterboard to stop joints from cracking. In townhouses, party walls usually require specific acoustic systems. We install the specified sound-rated boards and sealants strictly to the manufacturer's design before stopping up the joints.

Genuine plastering photographs

Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.

Plasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior Linings

Residential plastering

From fixing settlement cracks to sheeting full house extensions, we take care of all domestic plastering. We set internal angles sharp, keep joins flat, and sand everything back smooth so your painter can walk in and get straight to work.

Learn more →

Commercial plastering

We build partition walls, bulkheads, and suspended ceilings for local shops and offices. Where fire ratings or acoustic controls are specified, we build strictly to the engineered system drawings, keeping the job clean and on schedule.

Learn more →

Ceiling installation & replacement

Storms and roof leaks can cause ceilings to bow, crack, and pull away from timber joists. We check the framing, pull down damaged sheets cleanly, and install fresh plasterboard on straight steel battens so you get a flat, solid ceiling overhead.

Learn more →

Plasterboard fixing & setting

Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.

Learn more →

Suspended ceilings & bulkheads

We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.

Learn more →

Workmanship you can check

Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.

Simple quote & installation process

  1. 1

    Send your details

    Use the form with a few photos of the area.

  2. 2

    Inspection & quote

    We confirm the scope and give a clear written quote.

  3. 3

    Installation

    Sheeting, fixing, setting and sanding by our crew.

  4. 4

    Paint-ready finish

    A clean site and smooth surfaces ready for painting.

Taigum plastering FAQs

Can water-stained plasterboard ceilings be patched instead of fully replaced?

If the plasterboard has sagged, gone soft, or pulled off the timber, it needs to come down. If it is only a dry, minor water mark with solid board behind it, we can seal the stain, skim the area, and sand it back flush.

How do you match the surface when repairing walls in older brick-veneer homes?

We feather our base and top coats wide across the patch using multiple thin layers. Once sanded flat, the repair blends evenly into the old wall without visible bumps or ridges under light.

How do I get a quote?

Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.

What affects the price?

Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.

Nearby areas & services

Get in touch today for a straightforward quote on your Taigum plastering job.