Wooloowin Wall & Ceiling Plastering

Plasterers Wooloowin

Plastering in Wooloowin covers everything from patching old timber cottages to sheeting new builds. We handle hanging, stopping up, and sanding plasterboard so your walls and ceilings are flat and ready for paint.

Get a Free Plastering Quote

Free, no-obligation quote

Your details are only used to respond to your enquiry.

  • 10+ years experience
  • Residential & commercial
  • Free written quotes

Plastering services in Wooloowin

Plasterboard installation

New walls and ceilings for Wooloowin renovations and extensions.

Ceiling repairs

Cracks, holes, sagging and water damage repaired or replaced.

Fixing & setting

Sheets fixed, taped, set and sanded to a paint-ready finish.

Bulkheads & ceilings

Bulkheads and suspended ceilings around services and ducting.

Plastering for Character Homes and New Renovations

Wooloowin has plenty of classic timber homes mixed in with newer townhouses and extensions. Older timber framing moves with the weather, which can crack joints or cause battens to drop. On renos, we back-block ceiling joins and use the right compounds so joins stay put. Tying new plasterboard into old fibrous plaster or lath walls takes careful feathering and wide trowel work to get the finish flat.

Genuine plastering photographs

Queensland Interior Linings project photograph — a general example of our work, not a job in this suburb.

Plasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior LiningsPlasterboard sheeting, setting and ceiling work by Queensland Interior Linings

Residential plastering

We take care of full home renovations, room extensions, and everyday wall patches. Where sound control is needed, acoustic ratings come from the specified system and we install the sheets and seals strictly to those plans. We also do square-set finishes and standard cornices.

Learn more →

Commercial plastering

We put up partition walls, grid ceilings, and bulkheads for local shops, offices, and fit-outs. Fire ratings depend on the designed system, and we fit the specified plasterboard, clips, and fire sealant to match those details.

Learn more →

Ceiling installation & replacement

From fixing water damage after heavy rain to replacing old sagging ceilings, we sort out the framing and hang fresh board. We pack out uneven joists, run metal battens where needed, and fit moisture-resistant sheets in wet areas. We also frame and flush bulkheads for ducted air and lighting.

Learn more →

Plasterboard fixing & setting

Our Brisbane plasterers fix sheets to the correct spacing, tape and set joints in coats, then sand to a smooth, even surface ready for painting.

Learn more →

Suspended ceilings & bulkheads

We build bulkheads to hide ducting and services, and install suspended ceilings for commercial spaces to the specified system.

Learn more →

Workmanship you can check

Over 10 years in Brisbane plastering, with clear written quotes and a tidy site at the end of every job.

Simple quote & installation process

  1. 1

    Send your details

    Use the form with a few photos of the area.

  2. 2

    Inspection & quote

    We confirm the scope and give a clear written quote.

  3. 3

    Installation

    Sheeting, fixing, setting and sanding by our crew.

  4. 4

    Paint-ready finish

    A clean site and smooth surfaces ready for painting.

Wooloowin plastering FAQs

How do you repair water-damaged ceilings after storm leaks?

Once the leak is sorted, we cut away the soft or sagging plasterboard and let the framing dry out. We check the battens, screw off new sheets, and tape and set the joins so the ceiling is ready to paint.

Can you blend new plasterboard into older character home walls?

Yes. Older walls are rarely plumb or dead flat. We pack out the framing, use solid base coats, and feather the joint compound wide across the joins so the transition doesn't show under paint.

How do I get a quote?

Use the form at the top of this page and attach a few photos. We will reply with next steps or arrange an inspection.

What affects the price?

Size of the area, access, ceiling height, board condition and finish. Photos and measurements help us price accurately.

Nearby areas & services

Planning a renovation or need plaster repairs in Wooloowin? Give us a call for a straight quote.